SHH Horizontal Slurry Pumps

● Discharge Size:	1" to 6"
● Capacity:	16.2-1008 m³/h
● Head to:	12-118m
● Handing solids to:	0-70mm

Key word:

Slurry Pumps,Gravel Sand Pumps

Category:

SHH Slurry Pump

E-mail

info@slurrypump-hb.com

Inquiry

Products detail

detail

SH、SM、SHH Series Slurry Pump Main Technical Data
TYPE		MATERIAL		CLEAR WATER PERFORMANCE					IMPELLER
	ALLOWABLE MAX Power KW	LINER	IMPELLER	FLOW （㎥/h)	HEAD(m)	Speed r/min	MAX EFE %	NPSH （m)	VANES	Impeller Diameter mm
	ALLOWABLE MAX Power KW	LINER	IMPELLER	FLOW （㎥/h)	HEAD(m)	Speed r/min	MAX EFE %	NPSH （m)	VANES	Impeller Diameter mm
M-1-SHH-C	30	M	M	16.2-34.2	25-92	1400-2200	20	2-2.5	5	330
M-2-SHH-D	60	M	M	68.4-136.8	25-87	850-1400	47	3~7.5	5	457
M-3-SHH-E	120	M	M	126-252	12-97	600-1400	50	2-5	5	508
M-4-SHH-S	560	M	M	324-720	30-118	600-1000	64	3-8	5	711
6S-H	560	M	M	468-1008	20-94	500-1000	65	4-12	5	711

HH Series High Head Heavy Duty Slurry Pump

The High Head Slurry Pumps are heavy-duty slurry pumps which are able to transfer high-density and abrasive slurries in heavy industry and mining sites, coal washing plant, power plant, metallurgy, dredging and other industrial departments. With thick wear parts and heavy-duty support, SHH series could run in series in the allowable range of pump working pressure.
The liner and impeller of SHH model can be changeable and material can be either anti-abrasive metal or rubber. but material of liner and impeller of HH model only can be metal version.

Advantages of high head slurry pumps

Heavy-duty pump
Suitable for pumping liquid to high heights
Slow speeds due to large impeller diameters
suitable for all types of sludges
Solid concentrations up to 70 percent weight
Housing pressure up to 34bar
Coarse Sand
Mineral Concentration

SHH Series specifications

Size: 1" to 6"
Capacity: 16.2-1008m3/h
Head: 12-118m
Handing solids: 0-70mm
Casing pressure: Max.750 psig
Materials: Hyper chrome alloy etc.

SHH Series Features

Wetted Parts
● Impellers – wide variety of metallurgic options – pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination – optional castings of straight or semi-Francis vanes (from 3 to 8 vanes on certain sizes) offer wider hydraulic options in single sizes
● Liners – heavy-duty high chrome liner – active engineered attachment mechanism to casing via threaded bolts as opposed to unreliable glue

Seals
● Expeller (Centrifugal Seal) – no external sealing water required where applicable
● Stuffing Box – flushed gland sealing with braided packing and a lantern ring
● Mechanical Seals

Bearing Assembly
● Cartridge-style bearing housing allows for removal from pump and assembly in controlled environment
● Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field

Pump Features

1. The SHH pump is a horizontal cantilever centrifugal pump with double casing structure, which is Wholly exchangeable with HH series Warman pump. The pump casings are made of cast iron to bear the high pressure during the pump running and the inner wet end parts is made of high chrome alloy or rubber material for the wear abrasion and corrosion resistant purpose.

2. The bearing assembly is with bracket structure. It makes much easier to adjust the clearance of the impeller and the suction plate and easily disassembling the pump. The bearing is using grease lubrication.

3. Drive methods: the pump and motor could be used direct coupling (DC) drive, or with belts and pulley drives. When use pulley drives, there different installation methods, such as CV, CR, CL and ZV drives. It could be selected according to the room space and motor power, to meet the customer requirement.

4. The pumps are widely flow, good NPSHr and high efficiency. The pump could run in different speed, to make sure the pumps working in its highest efficiency point, and to meet the customer requirement. Also, to satisfy long distance transmission or other badly conditions, our pumps could be used in series.

Factory

FAQ

★ How can we guarantee quality?

Tests starting from material, casting, to machining, assembly,etc. are all done by our experienced & professional operators and advanced equipments which can ensure the top quality of every component to the whole machine.

★ What products do we have?

Horizontal slurry pumps (SH, SHH, SL,SM), Vertical slurry pump(SV, SVR), Gravel/Sand pump, Dredger pump, ZGB Series Slurry pump, ZJ Series Slurrypump, SPP& SHPP, Froth pump and spare parts or OEM.

★ Are you the manufacturer or trading company?

We are professional manufacturer for slurry pumps and spare parts for more than 20 years in the industry located in Shijiazhuang City.

★ What is your delivery time?

Fast delivery time. We have lots of inventory in our factory for the common pump parts.

★ What is your MOQ?

No MOQ requirement.

★ Can we visit your company?

We always welcome customers from different countries coming to our factory for visits and further communications.

IF the above questions don’t answer yours, send us messages online, or send email to us directly.

None

ONLINE MESSAGE

● Capacity:	Up to 1,180 m³/h or 5,200 US gpm
● Head:	Up to 55 m or 180 feet
● Working Pressure:	750 kPa or 110 psi
● Discharge Size:	40 – 250 mm or 1.5 – 10 inches