Longteng Machinery, a professional manufacturer of slurry pumps

< 1234 > proceed page

10

2026-10

Slurry Pumps for Flotation: When Is a Froth Pump Required?

Learn when a froth pump is required for flotation slurry, how entrained air affects pumping, and which operating data to check before selecting a pump

2026-10-10

09

2026-10

How Slurry Concentration Affects Pump Performance and Wear

Solids concentration affects more than slurry density. This guide explains its effects on pump operation, pipeline behavior, power, and wet-end wear, with a practical checklist for mining duties.

2026-10-09

16

2026-09

How Slurry Density Affects Pump Head and Power Requirements

Slurry density is an important factor in pump system evaluation because it affects pressure and power requirements. For the same pump head, a denser slurry creates higher pressure than water and generally requires more power to pump. However, density does not simply increase pump head in direct proportion. This article explains the relationship between slurry density, head, pressure and power, and why these parameters should be evaluated separately during slurry pump selection.

2026-09-16

14

2026-09

High Head vs High Flow Slurry Pump: What’s the Difference?

“High head” and “high flow” are often used when describing slurry pump requirements, but they do not mean the same thing. A project may need to transport a large volume of slurry, overcome a significant elevation difference, move slurry through a long pipeline, or meet several of these requirements at the same time. Each situation creates a different hydraulic duty.

2026-09-14

09

2026-09

Heavy Duty Slurry Pump Specifications Explained: Flow, Head, Solids and Materials

Understand the key specifications used to evaluate a heavy duty slurry pump, including flow, head, slurry SG, solids concentration, particle size and wet-end materials.

2026-09-09

07

2026-09

Heavy Duty Slurry Pump vs Standard Slurry Pump: What’s the Difference?

Heavy duty and standard slurry pumps are designed for different operating conditions. This guide compares their key differences in slurry severity, abrasion, solids concentration, particle characteristics, wet-end materials, maintenance, and operating requirements. It also explains when a heavy-duty configuration may be necessary and when a general-duty slurry pump may be sufficient, helping engineers and buyers make a more informed preliminary pump selection.

2026-09-07

< 1234 >